Category Archives: Heim Joints

RuffStuff Specialties Chromoly Heims

These RuffStuff Specialties Chromoly Heims are a very high quality, “Heat and Cryogenically” Treated 4130 Chromoly Rod End!

The housing is machined from 4130 Chromoly and the Ball is made from 52100 Bearing Steel. Both are heat treated and hard chrome finished for improved strength and corrosion resistance.

The race is made from injection molded Teflon impregnated Nylon which is used between the two components to allow for smooth and precise ball movement.

This unique manufacturing process make these heim joints tougher than any other rod ends on the market! We can say it more than doubles their effective lifespan. Obviously they are priced a little more than a cheap mild steel heims… but that’s because the quality is worth it.

These rod ends are not tested to breaking point, but are tested to “first deformation point”. This is a key highlight point… deformation is NOT breaking point.

Several of the other companies making Rod Ends test to breaking point. You will stop using the heim joint after it has bent, so why even care at what point they fall into a pile of pieces on the ground. That just dosen’t make any sense to the end user.

We have a large range of sizes so you can find just the joint for your application.

Ruffstuff Chromoly Heim Ball Joint
Ruffstuff Chromoly Heim Ball Joint
Find Out More

RUFFSTUFF Rod End Bearing Kits

The Left and Right hand set of Chromoly Rod Ends come with all the trimmings!

You get 1 Left & 1 Right hand Heims, 4 Zink Plated or Stainless Missalignment spacers with
34° degrees of misalignment, a left and a right hand gold zink plated or hard stainless Jam Nuts and a pair of weld in Tube Adapters to go with them.

  • 2 Bore Heat & Cryo Treated Chromoly Heims
  • 2 Tube Adapters
  • 2 Jam Nuts
  • 4 Misalignment Spacers

More Information

Jam Nut

These rod ends come with Hex Jam Nuts. Right or left hand thread with 16 threads per inch.

Misalignment

Missalignment does 2 things necessary to run Rod Ends on a 3 or 4 Link Suspension.

The first and most important is allow additional room for the joint to pivot and let your suspension articulate. That comes simply from the shape of the missalignment.

The second and less important comes from a functional standpoint, but equal from the operational point of view as it serves as a spacer and reducer. This allows the use of a smaller bolt than the bore of the Heim.

Heims Terminology

Spacer Width
This is the inside measurement of the mounting point.
Bolt Size
This is the size of the bolt to be used in the mounting point.
Eye I.D
Inside measurement if the heim eye without the misalignment spacer.
Shank
The shank size is the thread needed in the arm that the heim is to be screwed into.
Tube I.D
The inside diameter of the pipe the tube adaptor is to be welded into.
Tube O.D
This is the minimum recommended outside diameter of the pipe to be used.

Rod End Zinc Misalignment Spacer
Rod End Zinc Misalignment Spacer
Rod End Steel Misalignment Spacer
Rod End Steel Misalignment Spacer
Ruffstuff Heim Joint Tube Adapter
Ruffstuff Heim Joint Tube Adapter
Ruffstuff Heim Joint Jam Nut
Ruffstuff Heim Joint Jam Nut
Ruffstuff Chromoly Heim Threaded Rod End
Ruffstuff Chromoly Heim Threaded Rod End
Ruffstuff Chromoly Heim Joint With Misalignment Spacers Fitted
Ruffstuff Chromoly Heim Joint With Misalignment Spacers Fitted
Jam Nut Fitted To Rod End
Jam Nut Fitted To Rod End
Spacer, Jam Nut and Tube Adapter Fitted To Rod End
Spacer, Jam Nut and Tube Adapter Fitted To Rod End
Complete Rod End Set
Complete Rod End Set

Call (07) 5433 1411 For More Information