Ironman 4×4 produce a wide range of Leaf Springs to suit a range of load ratings… all designed to maintain optimum ride height.
Ironman 4×4 Leaf springs are produced from high quality steel that meets Australian standard AS1447 which are shot peened and load tested to ensure maximum longevity.
Available for different load varieties, to ensure the ride is perfectly matched to your requirements by being both strong and flexible.
Leaf Springs produced by Ironman 4×4 undergo class leading manufacturing processes to ensure the highest possible quality.
Features:
Inter-Leaf Liners
Used in some applications to lower friction between leaves reducing noise and improving comfort.
Lined Bolt Clamps
All Ironman springs feature bolted guide clamps for greater flex. The addition of anti-friction liners ensures noise free and ultra smooth operation.
Shot Peened
Shot peening manipulates the spring materials surface tension to reduce stress and will enhance and extend the springs life.
Diamond Cut Leaves
Distributes load at the leaf tip and reduces interleaf friction.
Military Wrap
Where applicable, an additional wrap around the leaf eye protects from failure in case of damage.
Find Out MoreRight side view of some steel leaves from an Ironman 4×4 Leaf SpringLeft side view of some steel sleeves, rebound clip, central clamp from a new set of Ironman 4×4 Leaf SpringsFull complete new set of Ironman 4×4 Leaf SpringsView of the pin mount end of the leaf springView of the graduated leaf springs and the load bearerClose up view of the shackle mount end of the leaf springClose up view of the rebound clip enclosing the leaves and load bearers from the leaf springTop down view of the support mount, main clamp and rebound clip of the Ironman springClose up view of the military style wrap common on leaf style springsThe Ironman 4×4 leaf spring laying on its end ready to be shipped out
FAQ’s:
What is unique about Ironman leaf springs?
The thing that makes Ironman leaf springs unique is that they’re designed to match driving style and vehicle use.
Ironman concentrates on improving ride, handling, comfort and control, while also providing lift. These design concerns are made without compromising safety and will make driving your vehicle a pleasure.
Ironman leaf springs allow you to choose the right design of springs that suits your driving style. So whether you drive on road, off road or with a constant load you can find the right spring that suits your needs.
How much lift can I expect from Ironman 4×4 springs?
Ironman leaf springs generally lift vehicles around 50mm above the normal vehicle ride height.
Will my vehicle ride firmer after fitting Ironman leaf springs?
Yes it can. While Ironman springs will firm the ride and support the load… used in conjunction with Ironman Shocks, the ride will also become noticeably smoother.
The MSA 4×4 Fridge Drop Slide was designed in Australia to handle the needs of harsh outback touring.
Manufactured from a premium powder coated steel frame with a Blue anodised aluminium handle, faceplate and handle brackets. These features give you a tuff, durable and attractive finish.
The top quality over extension roller bearing slides will allow you to easily clear your drawer system and most ute sides.
Gas struts and roller carrier bearings ensure the smooth and almost effortless controlled movement to lower and raise your fridge, freezer, generator or tool box.
Key locks, runner locks and a supplied tie down kit will keep your tray and fridge securely in place while you’re traveling.
These drop slides and the working components have been put through extensive and continuing product testing. They have been tested all over Australia in some of the toughest terrains to ensure our build quality will take just about anything.
These MSA Drop Slides are apart of thousands of Aussie tourers who travel every day.
“Best thing I’ve ever bought. Simply the best accessory for my 4WD vehicle!” Many Happy Customers
Note: The fridge samples are only a guide, please use the external measurements of your fridge against the fridge tray dimensions.
Note: Some fridge bags may obstruct the full use of the slide.
In-store display of the MSA 4×4 Fridge Drop Slide fully locked in the closed position prior to openingIn-store display of the MSA 4×4 Fridge Drop Slide sliding along the rails during the opening processIn-store display of the MSA 4×4 Fridge Drop Slide in the fully opened and dropped position ready for use
DS40 Specifications:
Drop: 300mm.
Fridge Tray: 715mm x 390mm.
Slide length closed: 800mm (+20mm for lock).
Slide width closed: 500mm (+20mm for nyloc nuts).
Runner length closed: 812mm.
Slide length open: 1625mm + 20mm.
Mounting floor to base of fridge: 35mm.
Load Rating: 200kg.
Tray outer size: 750mm x 398mm.
Tray inner size (including lock cover): 746mm x 388mm.
Usable tray size (minus lock cover): 711mm x 388mm.
DS45 Specifications:
Drop: 300mm.
Fridge Tray: 695mm x 480mm.
Slide length closed: 753mm (+20mm for lock).
Slide width closed: 594mm (+20mm for nyloc nuts).
Runner length closed: 740mm.
Slide length open: 1605mm + 20mm.
Mounting floor to base of fridge: 35mm.
Load Rating: 200kg.
Tray outer size: 730mm x 490mm.
Tray inner size (including lock cover): 726mm x 480mm.
Usable tray size (minus lock cover): 690mm x 480mm.
DS50 Specifications:
Drop: 300mm.
Fridge Tray: 810mm x 480mm.
Slide length closed: 880mm (+20mm for lock).
Slide width: 595mm (+20mm for nyloc nuts).
Runner length closed: 865mm.
Slide length open: 1107mm + 20mm.
Mounting floor to base of fridge: 35mm.
Load Rating: 200kg.
Tray outer size: 850mm x 490mm.
Tray inner size (including lock cover): 846mm x 480mm.
Usable tray size (minus lock cover): 814mm x 480mm.
DS60 Specifications:
Drop: 300mm.
Fridge Tray: 870mm x 530mm.
Slide length closed: 926mm (+20mm for lock).
Slide width: 642mm (+20mm for nyloc nuts).
Runner length closed: 913mm.
Slide length open: 1875mm + 20mm.
Mounting floor to base of fridge: 35mm.
Load Rating: 200kg.
Tray outer size: 904mm x 543mm.
Tray inner size (including lock cover): 900mm x 533mm.
Usable tray size (minus lock cover): 865mm x 530mm.
DS95 Specifications:
Drop: 300mm.
Fridge Tray: 955mm x 555mm.
Slide length closed: 1020mm (+20mm for lock).
Slide width: 675mm (+20mm for nyloc nuts).
Runner length closed: 1010mm.
Slide length open: 2170mm + 20mm.
Mounting floor to base of fridge: 35mm.
Load Rating: 200kg.
Tray outer size: 1003mm x 565mm.
Tray inner size (including lock cover): 955mm x 555mm.
Usable tray size (minus lock cover): 960mm x 555mm.
Please note: Front of slide can be mounted up to 80mm back from front edge of mounting surface.
Step 1: Open the rear door of your 4WD vehicle to allow easy access to the fridge drop slide.Step 2: Locate the key located on the supplied lanyard which will unlock the drop slide from the secured stored position.Step 3: Unlock the slide mechanism with the key which will allow operation of the drop slide.Step 4: Pull out and downwards on the blue lever handle and move the main box slide housing outwards.Step 5: Allow the drop slide to fully come to rest in the lower position.Step 6: Open your fridge at a comfortable height and get a cold drink, beverage or food.Step 7: Once you are finished, reverse the order of the previous steps to complete the procedure and return the drop slide to its original position.Step 8: Relax, kick back and enjoy yourself in the great outdoors.Call (07) 5433 1411 More
Superior Engineering now offer Swaybar Extensions to suit the Nissan Patrol and Toyota Landcruiser.
When raising your 4WD above 2″ inches consider using Superior extended sway bar links.
Our Research and Development (R&D) team here at Superior Engineering recongnise that not all four wheel drivers want to disconnect their sway bars, but instead want a longer sway bar to suit their lifted trucks.
This enables your standard sway bars to be retained… even up to 6″ inches of lift.
Manufactured from 4140 solid bar with top quality, premium grade 1/2″ inch rod ends.
These Swaybar Extensions are proudly made by Superior in Australia!
These simply replace the standard link pins and have a height adjustable thread to customise and fine tune the fitment.
All kits are supplied with appropriate hardware and bushes for easy fast fitment and installation.
Features:
Vehicle Specific Bolt-On Design – Easy fitment which utilises OEM mounting locations.
Adjustable Length – Adjustable extension where possible depending on vehicle model.
Practical Design – Strongest construction and materials to avoid bending and breaking.
Replaces Factory Links – Maximum anti-roll and sway control with smoother handling on-road and off-road.
Durable Coat – Finished with a durable coating to block rust, corrosion and oxidation.
Find Out MoreSuperior Swaybar Links in original 4×4 suspension packagingSuperior Swaybar Link extension out the original packagingCheck out the quality of this single complete Swaybar Extension on the work benchClose up view of the rod end on a Superior Engineering Swaybar ExtensionComes with the necessary hardware and fittings for the swaybar extensionThe necessary hardware includes nuts, bolts and washers for the swaybar extension installationCall (07) 5433 1411