Tag Archives: superior engineering

Rated Recovery Points Toyota Landcruiser 200 Series

This set of Super Heavy Duty Rated Recovery Points has been custom designed by Superior Engineering for the 2013 on model 200 Series Toyota Landcruiser four wheel drive vehicle.

Design Objectives

The issue around current aftermarket and factory tow and recovery points is the’re unsuitable for most recovery situations, especially if your Landcruiser is caught up on a steep track, stuck axle deep in mud or bogged down in sand.

Superior Engineering has designed this innovative recovery point so you can tow, snatch and recover your Toyota Landcruiser from any situation with absolute confidence.

This rated recovery point is manufactured from a whopping 10/16mm thick steel plate and is rated to a safe working load of a massive 5,000 Kilograms… and tested to an unbelievable 25,000 Kilograms.

The eye on these tow points are designed to be big enough to easily fit and handle a 4,750 Kilogram (4.75T) rated bow shackle.

These are CAD engineered to NOT cover up any of the vital crumple zones in the chassis, while also ensuring the tow points are fitted in the optimal locations to handle the stresses experienced during vehicle recovery.

Features & Benefits

  • Proudly made right here in Australia
  • Manufactured from high tensile steel
  • Laser cut to ensure a precise fit
  • Fabricated for the ultimate in durability and strength
  • Sand-blasted prior to powder coating
  • Finished off in a red semi-gloss powder coat
  • Coloured for high visibility
  • Coating provides maximum corrosion resistance

Video

Installation

This kit comes ‘Ready to Fit’ straight out of the box with all the grade 10.9 high tensile hardware, for a 100% percent bolt-in installation with NO cutting, welding, drilling or modifications needed.

It simply bolts straight up for maximum strength.

Includes the following component:

  • 2 x Rated Recovery Points
  • 2 x Spacer Plates
  • 4 x M12 x 1.25 x 40mm 10.9 Grade Bolts
  • 4 x Washers
  • 4 x Spring Washers

Gallery

A set of Superior rated recovery points finished off in a hard wearing red semi-gloss powder coat for high visibility and maximum corrosion resistance
A set of Superior rated recovery points finished off in a hard wearing red semi-gloss powder coat for high visibility and maximum corrosion resistance

A single 200 Series rated recovery point sitting on a plate steel side step
A single 200 Series rated recovery point sitting on a plate steel side step

Closeup view of the eye on the 200 Series Toyota Landcruiser rated recovery point
Closeup view of the eye on the 200 Series Toyota Landcruiser rated recovery point

Closeup view of the 4,750 Kilogram rated bow shackle which will suit the recovery point
Closeup view of the 4,750 Kilogram rated bow shackle which will suit the recovery point

A single Heavy Duty Rated Recovery Point for the 200 Series Toyota Landcruiser four wheel drive
A single Heavy Duty Rated Recovery Point for the 200 Series Toyota Landcruiser four wheel drive

Performing a recovery on the 200 Series Landcruiser using the Superior rated recovery point
Performing a recovery on the 200 Series Landcruiser using the
Superior rated recovery point

Right side view of a 200 Series Landcruiser on Bribie Island beach with the recovery point installed
Right side view of a 200 Series Landcruiser on Bribie Island beach with the recovery point installed

Closeup view of a pair of 200 Series Landcruiser recovery points fitted in the optimal location to handle the stresses experienced during vehicle recovery
Closeup view of a pair of 200 Series Landcruiser recovery points fitted in the optimal location to handle the stresses experienced during vehicle recovery

Heavy duty, strong, reliable recovery points like this Superior version are Essential, if you're planning on doing any offroad driving
Heavy duty, strong, reliable recovery points like this Superior version are Essential, if you’re planning on doing any offroad driving

Left side view of a 200 Series Toyota Landcruiser on the beach at Bribie Island fitted with a set of recovery points
Left side view of a 200 Series Toyota Landcruiser on the beach at Bribie Island fitted with a set of recovery points

Summary

Heavy duty, strong, reliable recovery points like this Superior version are ‘Essential’, if you’re planning on doing any offroad driving.

Don’t trust your vehicle to cheap, inferior recovery products that could jeopardise you, your family or your vehicle’s safety.

Upgrade today and take home “Piece of Mind” that you’re buying the strongest Toyota Landcruiser recovery points in Australia.

These Recovery Points are available to purchase online 24/7, over the phone during business hours or in-person at the Superior Engineering Deception Bay 4×4 Retail Showroom.


Buy This Recovery Point Online

Tie Rod Adjuster Nissan Navara D22

This ALL New Generation 2.0 Tie Rod Adjuster from Superior Engineering has been designed to suit the D22 STR/DX model Nissan Navara four wheel drive vehicle.

Design Objectives

Superior has designed this adjustable Tie Rod assembly to prevent the tie rods from bending after doing a lift or adding bigger tyres to your truck… Perfect for D22’s with lifts from 0″-3″ inches.

These tie rod adjusters offer a HUGE strength upgrade over OE and bolt straight up to OE steering linkages… making them a complete bolt-in replacement for your factory adjusters!

Features two heavy duty 3mm weld on skid plates to stop the tie rod nut fouling on the chassis, which can cause the tie rod to SNAP if the vehicle “Centre Rod” becomes worn or takes on hard impact which is transmitted to the steering.

This component is proudly made right here in Australia, manufactured from high tensile steel, cnc machined for the ultimate in durability and strength, then sand-blasted and finished off in a 7-Step SA5 Zinc coating for maximum corrosion resistance.

The kit includes Tie-Rod Adjusters, Weld-on skid plates, Heavy Duty Rod-Ends, ITS sealing rings, locking nuts and cotter pins.

These adjusters are 100% Street Legal and Compliant, and DO NOT require separate approvals to be used on Public roads within Australia.

They are sold as a pair and come ‘Ready to Fit’ straight out of the box with easy to follow fitting instructions.

To up the stakes even further, Superior Engineering now includes ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.

By adding a specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread and the link, a perfect pressure tight seal is created.

This patented process is EXCLUSIVE to Superior Engineering’s internally threaded items such as these tie rod adjusters.

To top it all off, the Superior logo is engraved onto the rods to ensure you’re getting a GENUINE Superior Engineering component instead of a cheap inferior copy from other manufacturers.

Features & Benefits

  • HUGE Strength Upgrade Over OE Components
  • Includes High Tensile Locking Nuts
  • 32mm High Tensile Steel Adjuster
  • Quality Superior Tie Rod Ends
  • ITS Corrosion Resistant Seal Technology
  • Supplied With 2 x Premium Heavy Duty Skid Plates
  • Bolts-Up To OE Steering Linkages
  • Hard Wearing 7-Step SA5 Anti-Corrosion Zinc Coating
  • Fitting & Maintenance Instructions Included

Installation

The kit comes ‘Ready to Fit’ straight out of the box, for a 100% bolt-in installation with NO cutting, drilling or welding needed.

It simply bolts straight up to the original mounting points using original mounting hardware for superior strength.

Includes the following component:

  • 2 x Tie Rod Adjusters
  • 2 x Right Hand Thread Rod Ends
  • 2 x Left Hand Thread Rod Ends
  • 1 x PS D22 Tie Rod Skid Plate
  • 1 x DS D22 Tie Rod Skid Plate
  • 2 x M20 LH Thread Nuts
  • 2 x M20 RH Thread Nuts
  • 4 x Castle Lock Nuts
  • 4 x 22×2.5 O-Rings
  • 4 x Cotter Pins

Gallery

A pair of heavy duty Tie Rod Adjusters to suit the Nissan Navara D22 4WD
A pair of heavy duty Tie Rod Adjusters to suit the Nissan Navara D22 4WD

A pair of heavy duty 3mm tie rod skid plates to suit the Nissan Navara D22 4WD
A pair of heavy duty 3mm tie rod skid plates to suit the Nissan Navara D22 4WD

Heavy duty high tensile tie rod locking nuts
Heavy duty high tensile tie rod locking nuts

Genuine heavy duty high quality tierod ends come with the adjuster kit
Genuine heavy duty high quality tierod ends come with the adjuster kit

The Nissan Navara D22 old design tie rod adjuster
The Nissan Navara D22 old design tie rod adjuster

Exclusive ITS Seal Technology on the internal thread and linkages
Exclusive ITS Seal Technology on the internal thread and linkages

This component is proudly made right here in Australia at the Superior Burpengary warehouse
This component is proudly made right here in Australia at the Superior Burpengary warehouse

These adjusters are 100% Street Legal and Compliant for fitment under NCOP
These adjusters are 100% Street Legal and Compliant for fitment under NCOP

Summary

Get rid of those puny 14mm adjusters and upgrade to a MASSIVE 32mm High-Tensile steel adjuster rod, fitted with Extra-Heavy duty 20mm male thread rod ends.

Upgrade now to a Superior Engineering D22 adjuster and take home ‘Piece of Mind’ that you’re buying the strongest components in Australia.

These Tie Rod Adjusters are available to purchase online 24/7, over the phone during business hours or in-person at the Superior Engineering Deception Bay 4×4 Retail Showroom.


Buy This Kit Online

Fuel Tank Guard Ford Ranger & Mazda BT-50

This Heavy Duty Fuel Tank Guard from Superior Engineering has been designed to suit the current model PX Ford Ranger and Mazda BT-50 (Series 2) four wheel drive vehicles.

Design Objectives

The problem with running a factory fuel tank is that it’s made of plastic, which you guessed it, is prone to damage in the event of the slightest impact, leaving your fuel tank and your safety at risk.

This is the major cause of fuel tank damage while driving offroad, due to the fact that it exposes your vehicles tank to damage from various obstacles such as rocks, logs, debris and bumps.

The solution is to fit a Superior Engineering Heavy Duty “Fuel Tank Guard” to protect your factory or aftermarket fuel tank.

This protection plate fully covers the fuel tank and perfectly integrates into the vehicle design, allowing for maximum protection against potential damage.

The tank guard is manufactured from premium grade Australian 3mm steel plate, laser cut for precise fitment, sand-blasted and then finished off in a hard wearing, semi-gloss, black powder coat for maximum durability and rust prevention.

Features a solid 1-piece design for super easy maintenance and utilises a smooth low profile for maximum ground clearance and less chance of getting hung up on obstacles.

Incorporates precisely placed dimple die holes into the design to add extra strength to the guard and to aid in airflow and drainage.

This Superior guard is 100% proudly made right here in Australia at their Burpengary warehouse, which ensures you get a true heavy duty and GENUINE component, unlike the weaker Chinese versions starting to appear in the market.

Features & Benefits

  • High Level of Protection – this fuel tank guard fully covers the lower section of the tank providing you the best protection
  • Powder Coat Finish – hard wearing black powder coat finish
  • Heavy Duty Materials – manufactured from premium 3mm steel plate
  • Laser Cut – all plates are laser cut and pressed for a precise fit
  • Mounting Points – utilises original monting points for added strength

Video

Installation

The kit comes ‘Ready to Fit’ straight out of the box, for a 100% bolt-in installation with NO cutting, drilling or welding needed.

It simply bolts straight up to the original mounting points using original mounting hardware for superior strength.

Includes the following component:

  • 1 x Fuel Tank Guard

Gallery

A single Superior Engineering Heavy Duty Fuel Tank Guard to suit the Ford Ranger & Mazda BT-50
A single Superior Engineering Heavy Duty Fuel Tank Guard to suit the Ford Ranger & Mazda BT-50

The underbody guard incorporates precisely placed dimple die holes into the design to add extra strength to the guard and to aid in airflow and drainage
The underbody guard incorporates precisely placed dimple die holes into the design to add extra strength to the guard and to aid in airflow and drainage

This guard features a solid 1-piece design for super easy maintenance and utilises a smooth low profile for maximum ground clearance
This guard features a solid 1-piece design for super easy maintenance and utilises a smooth low profile for maximum ground clearance

The fuel tank guard is manufactured from premium grade Australian 3mm steel plate and laser cut for a precise fit
The fuel tank guard is manufactured from premium grade Australian 3mm steel plate and laser cut for a precise fit

A closeup under vehicle view of a plastic factory fuel tank guard which comes standard on the Ford Ranger 4WD
A closeup under vehicle view of a plastic factory fuel tank guard which comes standard on the Ford Ranger 4WD

A closeup under vehicle view of the Superior Engineering aftermarket fuel tank guard which has been fitted to the Ford Ranger which fully covers the fuel tank and perfectly integrates into the vehicle design
A closeup under vehicle view of the Superior Engineering aftermarket fuel tank guard which has been fitted to the Ford Ranger which fully covers the fuel tank and perfectly integrates into the vehicle design

Summary

Don’t get left stranded on the side of the track because your fuel tank gets damaged because you’re using a cheap inferior guard or even worse, you didn’t even fit one just becuase you wanted to save a couple of bucks or you thought it could never happen to me.

Upgrade now to a Superior Engineering Fuel Tank Guard and take home ‘Piece of Mind’ that you’re buying the strongest guard in Australia.

After fitting this fuel tank guard, you will “Sleep Tight” knowing that you’ll make it home safely on your next offroad adventure.

These guards are available to purchase online 24/7, over the phone during business hours or in-person at the Superior Engineering Deception Bay 4×4 Retail Showroom.


Want More Information Click Here or Comment Below

Transfer Case Guard Ford Ranger & Mazda BT-50

This Heavy Duty Transfer Case Guard from Superior Engineering has been designed to suit the current model Ford Ranger and Mazda BT-50 (Series 2) four wheel drive vehicles.

Design Objectives

The main problem with driving offroad without any underbody protection fitted to your 4×4, is that your vehicle is prone to damage in the event of any type of impact, putting your safety and your vital driveline components at risk.

The transfer case is one of the most overlooked items but is also one of the most exposed and vulnerable.

All it takes is a split second lapse while driving and your vehicle may be incapacitated from a bent, broken or leaking transfer case.

This is an all too common cause of underbody component damage while driving offroad, due to the fact that your entire driveline is exposed and your vehicle is open to untold damage from various obstacles such as rocks, logs, ruts and stumps.

The solution is to fit the newly designed Superior Engineering Transfer Case Guard which covers the entire transfer case giving you maximum protection without compromising performance of your vehicle.

These guards are considered to be one of the most basic and essential items for any 4WD that sees dirt and rock action.

This guard is proudly manufactured in Australia from premium grade Australian 4mm steel plate, laser cut for precise fitment, fabricated by trained professionals and finished off in a hard wearing, semi-gloss, black powder coat for maximum durability and rust prevention.

Features a solid 1-piece design for easy maintenance, incorporates a smooth low profile for maximum ground clearance and the ability to slide across objects without getting stuck on sharp rocks and ledges.

This underguard is CAD Engineered and fabricated with press formed sections to provide additional strength and to help dissipate forces and transfer energy from impacts safely back into the chassis and crossmember.

Another advantage is that it simply bolts directly to the chassis and crossmember utilising the original mounting points for superior strength.

This Superior Engineering underguard is 100% Street Legal and Compliant, and DOES NOT require separate approvals to be used on Public roads within Australia.

Features & Benefits

  • High Level of Protection – this transfer case guard fully covers the lower section of the transfer giving the best protection
  • Powder Coat Finish – hard wearing black powder coat finish
  • Heavy Duty Materials – manufactured from 4mm steel plate
  • Laser Cut – all plates are laser cut for a precise fitment
  • Full Fitting Kit – supplied with a full fitting kit including all 8.8 high tensile hardware for easy installation of the underguard
  • Mounting Point – bolted to the chassis and crossmember for superior strength

Video

 

Installation

The kit comes ‘Ready to Fit’ straight out of the box, including all the 8.8 high tensile hardware for a 100% bolt-in installation with NO cutting, drilling or welding needed.

Includes the following components:

  • 1 x Transfer Case Guard
  • 4 x M10 X 25 X 1.5 Dome Head Bolts
  • 4 x M10 Flat Washers
  • 4 x M10 Spring Washers

Gallery

A closeup view of a Superior Engineering Heavy Duty Transfer Case Guard to suit the Ford Ranger & Mazda BT-50
A closeup view of a Superior Engineering Heavy Duty Transfer Case Guard to suit the Ford Ranger & Mazda BT-50

A Ford Ranger & Mazda BT-50 Heavy Duty Transfer Case Guard on display at the Superior retail showroom
A Ford Ranger & Mazda BT-50 Heavy Duty Transfer Case Guard on display at the Superior retail showroom

A Heavy Duty Transfer Case Guard fitted to the chassis and crossmember on a current model Ford Ranger 4WD
A Heavy Duty Transfer Case Guard fitted to the chassis and crossmember on a current model Ford Ranger 4WD

Closeup view of a Heavy Duty Transfer Case Guard fitted to the chassis and crossmember on a current model Ford Ranger 4WD
Closeup view of a Heavy Duty Transfer Case Guard fitted to the chassis and crossmember on a current model Ford Ranger 4WD

Closeup view of the guard whick is cnc pressed and finished off in a hard wearing, semi-gloss, black powder coat for maximum durability and rust prevention
Closeup view of the guard whick is cnc pressed and finished off in a hard wearing, semi-gloss, black powder coat for maximum durability and rust prevention

Closeup view of the guard's press formed sections to provide additional strength and to help dissipate forces and transfer energy from impacts safely back into the chassis and crossmember
Closeup view of the guard’s press formed sections to provide additional strength and to help dissipate forces and transfer energy from impacts safely back into the chassis and crossmember

Closeup view of all the grade 8.8 high tensile nust, bults and washers which come with the kit for a 100% bolt-in installation
Closeup view of all the grade 8.8 high tensile nust, bults and washers which come with the kit for a 100% bolt-in installation

Summary

Just to recap, this Transfer Case Guard is 100% Australian made and manufactured from heavy duty premium grade steel, then CNC machined and pressed for a precise fit and the ultimate in performance.

This underbody vehicle protection is sand blasted and black powder coated for the highest quality finish and for maximum durability.

This small investment could save you thousands of dollars in repairs and replacement costs.

Protect yourself and your vehicle by upgrading today with a Superior transfer case guard and take home ‘Piece of Mind’ that you’re getting the ultimate in protection and safety.

These guards are available to purchase online 24/7, over the phone during business hours or in-person at the Superior Engineering Deception Bay 4×4 Retail Showroom.


Want More Information Click Here or Comment Below

Stealth Pinion Guard Ford Ranger PX

The Superior Engineering Stealth Rear Pinion Guard has been custom designed and manufactured to suit the PX Ford Ranger (2012-2015) rear differential.

Design Objectives

This guard has been designed to sit as close to the original diff housing as possible for the ultimate protection of your Pinion.

To further add to the protection, the Pinion guard is also supplied with a brace that fits snuggly against the housing to help share the impact load.

The guard is proudly made right here in Australia, laser cut from heavy duty 6mm 250 grade Australian steel, CAD engineered for the ultimate in durability and strength, CNC pressed for a precise fit, then sand-blasted and powder coated for a hard wearing corrosion resistant finish.

Drain holes are also included to ensure easy care and maintenance of this component.

This guard is a 100% bolt-on component that comes ‘Ready to Fit’ straight out of the box with all the grade 8 hardware, for a quick and easy installation with NO cutting, drilling or welding needed.

The Superior engineers designed this component to work seamlessly and perfectly with their bolt-on Diff Guard.

By using their Stealth pinion and diff guard, you know your rear diff can handle anything it impacts… Guaranteed!

These Superior guards are a small investment for a lifetime of protection and safety to your driveline.

Features & Highlights

  • Fits Snuggly Against Diff Housing
  • Bolt-On, No Cutting, Drilling or Welding Needed
  • 100% Made Here In Australia
  • Street Legal & Compliant
  • Exclusive To Superior Engineering
  • Superior Heavy Duty Design & Build Quality
  • Premium Powder Coated Satin Black Finish
  • Includes Full Fitting Kit

Installation

The pinion guard comes ‘Ready to Fit’ straight out of the box.

Includes all the grade 8 hardware, for a direct 100% bolt-in installation with NO cutting, drilling or welding needed.

Includes the following components:

  • 1 x Ford Ranger Pinion Guard
  • 2 x Pinion Guard Backing Plates
  • 4 x M14 X 1.5 X 130mm Bolts
  • 4 x M14 X 1.5 Nylock/Conelock Nuts
  • 8 x M14 Flat Washers

Gallery

Under vehicle closeup view of a Superior Stealth Pinion Guard bolted to the PX Ford Rangers diff
Under vehicle closeup view of a Superior Stealth Pinion Guard bolted to the PX Ford Rangers diff

Under vehicle view of the Superior Stealth Pinion Guard bolted to the PX Ford Rangers differential
Under vehicle view of the Superior Stealth Pinion Guard bolted to the PX Ford Rangers differential

Closeup side view of the Superior Stealth Pinion Guard bolted to the PX Ford Rangers providing complete coverage to the differential
Closeup side view of the Superior Stealth Pinion Guard bolted to the PX Ford Rangers providing complete coverage to the differential

Closeup side view of the Superior Stealth Pinion Guard bolted to the PX Ford Rangers providing complete coverage to the differential
Closeup side view of the Superior Stealth Pinion Guard bolted to the PX Ford Rangers providing complete coverage to the differential

Closeup side view of the Superior Stealth Diff Guard and Pinion Guard set bolted to the PX Ford Rangers providing total coverage to the differential
Closeup side view of the Superior Stealth Diff Guard and Pinion Guard set bolted to the PX Ford Rangers providing total coverage to the differential

Summary

Just to recap, the Ford Ranger Pinion Guard is 100% Australian made and manufactured from heavy duty 250 grade steel, then CNC machined and pressed for the ultimate in durability and performance.

This underbody vehicle protection is sand blasted and black powder coated for the highest quality finish and for maximum durability.

They are available to purchase on the Superior website, over the phone during business hours or in-person at the Superior Engineering Deception Bay 4×4 Super Showroom.


Want More Information Click Here or Comment Below